Investigaciones por Área Temática

Título Autor Año Palabras Clave
Analysis and Prediction of Overlapped Effect on Inherent Deformation During the Line Heating Process
  • Vega, Adán
  • Escobar, Ernesto
  • Fong, Amaly
  • Ma, Ninshu
  • Murakawa, Hidekazu
2013 plate forming, line heating, inherent deformation, overlapped heating lines, overlapping effect, FEM
Predicción de la Distorsión Inducido por los Procesos de Soldadura en Estructuras de Acero Utilizando Modelos de Redes Neuronales
  • Vega S., Adán
2012 neural networks, residual stresses, line heating, inherent deformation
Analysis and Prediction of Multi-Heating Lines Effect on Plate Forming by Line Heating
  • Vega, Adán
  • Rashed, Sherif
  • Tango, Yoshihiko
  • Ishiyama, Morinobu
  • Murakawa G., Hidekazu
2008 line heating, inherent deformation, FEM, multi-heating, residual stresses, side edge effect.
Influential Factors Affecting Inherent Deformation During Plate Forming by Line Heating (Report 5) – The Effect of Water Cooling
  • Vega, Adán
  • Tango, Yoshihiko
  • Ishiyama, Morinobu
  • Rashed, Sherif
  • Murakawa, Hidekazu
2011 line heating; water-cooling; inherent deformation; heat transfer coefficient; database; edge effect; FEM
Desarrollo de una Metodología para el Análisis de Propagación de Fracturas en Componentes Mecánicos
  • Morazán, Josemaría
  • Cruz, Evgeni
  • Plazaola, Carlos
  • Banfield, Ilka
  • Vega, Adán
2012 análisis de fallas, propagación de grietas, método de elementos finitos, predicción, esfuerzos residuales, failure analysis
Numerical Study on Inherent Deformation of Thick Plates Undergoing Line Heating
  • Vega, A.
  • Tajima, Y.
  • Rashed, S.
  • Murakawa, H.
2007 líneas de calentamiento, deformación inherente, places gruesas, efecto de múltiples líneas de calentamiento, método de elementos finitos, line heating; inherent deformation; thick plates
Influential Factors Affecting Inherent Deformation During Plate Forming by Line Heating (Report 1) – The Effect of Plate Size and Edge Effect
  • Vega, Adán
  • Rashed, Sherif
  • Serizawa, Hisashi
  • Murakawa, Hidekazu
2007 line heating, inherent deformation, residual stress, plate length effect, plate width effect, edge effect
Predicción de la Distorsión Inducido por los Procesos de Soldadura en Estructuras de Acero Utilizando Modelos de Redes Neuronales
  • Vega S., Adán
2012 neural networks, residual stresses, line heating, inherent deformation
Morphological Characterization of Brazilian Organ Clays Using AFM and SEM Studies
  • Tejedor, A.
  • Navarro, G.
  • Rubio, J.
2013 atomic force microscopy, organoclays, montmorillonites, scanning electron microscopý
Characterization of Mg2+ and Ni2+ Doped Li2 FeSiO4 Cathode Material for Litithium Ion Batteries
  • Jiménez, M.
  • Iglesias, J.
  • Flores, E.
  • Tabares, J. A.
  • Pérez Alcázar, G. A.
  • Jaén, J. A.
2012 orthosilicates, Li2FeSiO4
Ecopapel a Base del Cogollo de la Piña
  • Aguilar, Moisés
  • González, Danuvia
  • Otero, Edsel
  • Patiño, Julio
  • Pérez, Ariadnis
  • Ramos, Johana
  • Tejedor, Alexis
2015 piña, celulosa, papel, lignina, control de calidad, pineapple
Analysis of the Effectiveness on Reducing Welding Distortion of a Low Transformation Temperature Weld Wire
  • Vega, Adán
  • Murakawa, Hidekazu
  • Dye, David
  • Béres, Miloslay
2011 solid–state phase transformation, displacive phase transformation, residual stress, FEM, welding distortion
Analysis of Crack Propagation in Mechanical Components Presenting Multiples Cracks
  • Morazán, Josemaría
  • Plazaola, Carlos
  • Banfield, Ilka
  • Vega, Adán
2012 mecánica de fracturas, propagación de fallas, simulación, esfuerzo, método de elementos finitos, método de elementos finitos por enriquecimiento
Simulación y Caracterización Óptica de Dióxido de Vanadio en Ventanas Inteligentes
  • Cruz de Gracia, E. S.
  • Santamaría L., M.
  • Schelp, L. F.
2014 simulación óptica, reflectancia, transmitancia, longitud de onda y multicapa.optical simulation, reflectance, transmittance
Design of MSE Wall Reinforcement and Barriers against Truck Impact of the Barrier placed on Top of the Wall
  • Briaud, Jean-Louis
  • Bligh, Roger
  • Abu-Odeh, Akram
  • Kim, Kangmi
  • Saez, Deeyvid
2011 muros mecánicamente estabilizados, barrera-fundación, barrera tipo L, barrier stability, mechanically stabilized Earth, L shape barrier.
The Effect of Low Transformation Temperature Weld Filler Metal on Welding Residual Stress
  • Murakawa, Hidekazu
  • Béreš, Miloslay
  • Davies, C.
  • Rashed, Sherif
  • Vega, Adan
  • Tsunori, M.
  • Kamran, Nikbin
  • Dye, David
2010 residual stress, gmaw, carbon steels, finite element modeling, neutron diffraction, solid state phase transformations.
Adsorption of Cu Ions Onto a 1.10 Phenanthroline-grafted Brazilian Bentonite
  • Tejedor De León, A.
  • Goulart, D.
  • Rubio, J.
2003 adsorption, bentonite, delaminated, intercalation, 1.10 phenanthroline, pillared
Fractal Analysis of Geomorphologic Processes in the Linux Environment Using SCILAB
  • Acosta B., Leomar
  • Mojica A., Alexis
  • Ho, Carlos A.
2008 dimensión fractal, litoral, plataforma de Scilab, Linux, fractal dimension, coastline
Analysis and Prediction of Welding Distortion in Complex Structures Using Elastic Finite Element Method
  • Vega, Adán
  • Plazaola, Carlos
  • Banfield, Ilka
  • Rashed, Sherif
  • Murakawa, Hidekazu
2012 complex ship’s structures, elastic analysis, finite element analysis, inherent strain, welding distortion
Simulación de Procesos de Soldadura en Estructuras Complejas Utilizando el Método Elástico de Elementos Finitos
  • De Gracia C., Luis
  • Plazaola, Carlos
  • Banfield, Ilka
  • Vega, Adán
2012 distorsiones de soldadura, esfuerzos residuales, método elástico de elementos finitos, simulación, estructuras navales, welding distortion

Páginas